How to Get Waves out of Vinyl Flooring

Get Waves out of Vinyl Flooring

Table of Contents

How to Get Waves Out of Vinyl Flooring - Your Resource for All Things Flooring

Image Source: FlooringHunt

The durability, low cost, and adaptability of vinyl flooring have made it a popular option for homes. This kind of flooring is great for high-traffic areas like kitchens, baths, and entryways since it is durable and can endure a lot of use and moisture. 

Vinyl flooring may be found in a multitude of designs, colors, and patterns, making it versatile enough to complement almost any decor. However, due to factors such as moisture and the weight of furniture, vinyl flooring can become wavy over time. In this post, we’ll go over why it’s so important to preserve your vinyl flooring in pristine condition and how to get waves out of vinyl flooring. 

Use this comprehensive guide about vinyl flooring to educate yourself. Please continue reading, as we have much more to share with you. 


Causes of Waves in Vinyl Flooring

Many homes choose vinyl flooring because it is long-lasting, inexpensive, and simple to clean and repair. Vinyl flooring, however, is prone to developing waves or ripples over time, which may be both ugly and hazardous. The following are some of the possible causes of waves in vinyl flooring:


A. Improper Installation: 

Incorrect installation is a leading cause of waves in vinyl flooring. Over time, ripples can develop in vinyl that was not installed perfectly flat, with no gaps or overlaps. If the subfloor is not adequately prepared, or if the glue is not placed uniformly, this may also occur.


B. Relative Humidity and Moisture: 

Humidity and moisture are other frequent culprits in the appearance of waves in vinyl flooring. Water seepage beneath vinyl flooring may weaken the glue and bring on waves. This is particularly typical in damp environments like kitchens, baths, and basements. Furthermore, vinyl can develop waves over time if it is not acclimated to the room’s temperature and humidity levels prior to installation.


C. Heavy Furniture and Foot Traffic: 

Vinyl flooring is susceptible to waves from heavy furniture and foot activity. Without the right cushioning, vinyl flooring may have indentations and eventually develop waves from the weight of heavy furniture. In a similar vein, vinyl may buckle and generate waves if there is a lot of foot movement in a certain region.


Tools and Materials Needed:

To get the finest waves from vinyl flooring, you’ll need a few specific techniques and supplies. The following is a list of potential necessities:


Hair dryer or heat gun: 

Vinyl flooring may benefit from being heated to make it more malleable and simpler to work with in order to get rid of waves. One may use a heat gun or hairdryer for this purpose, but caution must be taken to avoid warping or melting the vinyl by applying too much heat.


Weights or heavy objects: 

The waves may be calmed by placing heavy items on the affected region. Books, bricks, or anything else of sufficient weight may be used to exert steady pressure without scratching the vinyl.


Floor roller: 

A floor roller is a tool used in the setup and upkeep of vinyl floors. The vinyl flooring is more stable and less likely to experience waves if this is used.


Replacement planks: 

Damaged or warped vinyl planks may need replacement. Obtain matching flooring planks and install them per the manufacturer’s instructions.



Applying glue to the afflicted region may be necessary if the waves are the result of poor installation or adherence. Always consult the vinyl flooring manufacturer’s recommendations before selecting an adhesive.


Clean, dry cloth: 

Any surplus liquid or glue may be removed using a dry, clean cloth. 


Take Note: Keep in mind that not every scenario calls for the same set of resources. The equipment and supplies needed to fix the waves in your vinyl flooring will depend on their severity and origin. To minimize additional damage to your flooring, it is always preferable to speak with a professional if you are unclear about the equipment and supplies to use or how to use them appropriately.


How to Get Waves Out of Vinyl Flooring

There are a number of solutions available for removing waves from vinyl flooring. The following are some tried and true methods for smoothing out vinyl flooring:


A. Use a Heat Gun or Hairdryer: 

To loosen the vinyl flooring and make it simpler to remove the waves, you might use a heat gun or a hairdryer. Focus the heat where it’s needed, and then use the putty knife to smooth out the vinyl as it softens. Overheating the vinyl may cause irreparable harm to the material.


B. Weigh Down the Affected Area: 

Vinyl flooring that has waves may also be fixed by placing heavy objects on the region. Put some weights or books on top of the water and let them sit there for a while (or overnight). This will aid in smoothing out the vinyl and getting rid of the ripples.


C. Use a Floor Roller: 

Vinyl flooring that has waves may also be smoothed out using a floor roller. Apply pressure on the area and roll it in various directions, working outward from the center. This should smooth out the glue and get rid of any trapped air bubbles producing the waves.


D. Change Out Rotten Boards: 

Vinyl planks may need to be replaced if they are severely worn or if the waves are very powerful. Take out the bad planks and put in the new ones carefully. To prevent further waves, make sure the new planks are correctly aligned and glued down.


Prevention Tips

It’s far simpler to prevent vinyl flooring waves than it is to fix them. If you want to keep your vinyl flooring from developing waves, consider the following:


Appropriate Setup: 

Avoiding waves in vinyl flooring requires careful installation. Make sure the flooring is smooth and level, and that the vinyl is laid down without any overlaps or gaps. Make sure the glue you choose is of good quality and that you apply it evenly.



It’s best to let vinyl flooring adjust to the room’s temperature and humidity before putting it. This will lessen the likelihood of waves being formed as a result of vinyl’s expansion and contraction.


Avoid Moisture and Humidity: 

Vinyl flooring requires a dry environment at all times. Dehumidifiers should be used in very humid places, and spills should be cleaned up right away.


Use Proper Padding: 

To protect your floors from indentations and subsequent waves, use furniture pads beneath heavy pieces of furniture. Area rugs should also be used in heavy foot traffic areas to soften the impact.


Regular Maintenance: 

Keep your vinyl flooring in excellent shape by cleaning and maintaining it regularly. Do not clean or scrub the surface with anything that has abrasives. Dirt and debris may be swept off with a soft bristle brush or vacuumed up with a hard floor attachment.


Frequently Asked Questions: FAQs


When laying vinyl flooring, how long does it take for the waves to disappear?

The length of time required to get rid of waves in vinyl flooring is relative to the intensity of the waves and the technique employed to get rid of them. Timeframes range from a few hours to many days.


Can waves in vinyl flooring be cleaned away using a steam mop?

Vinyl floors are not suitable for steam cleaning since it might harm them and make the waves worse.


Can the waves in vinyl flooring be flattened out with a hammer and a piece of wood?

No, a hammer and wooden block will only do more harm than good when trying to fix vinyl flooring.


Is it possible to fix the waves in vinyl flooring by yourself?

Indeed, using the aforementioned techniques, waves in vinyl flooring can be repaired without the aid of a professional.


Does smoothing out waves in vinyl flooring change the way it looks?

If done properly, eliminating waves in vinyl flooring shouldn’t change the flooring’s look.

Final Words

While waves in vinyl flooring can be unsightly and even dangerous, they are not an insurmountable obstacle. You may have a vinyl floor that is durable and free of waves if you know what causes them and take the necessary precautions. A floor roller, a heat gun, a hairdryer, or even replacing broken planks are all viable choices for smoothing out vinyl flooring that has developed waves. 

Prevention is always preferable, so read up on how to keep your vinyl floor looking fantastic for years to come by avoiding the common causes of wave formation. Keep in mind that with little TLC and regular maintenance, your vinyl flooring may survive for years and look great doing it.

Check out our other pieces if you want to learn more about flooring: 


Written By: Trisha Mae Raymundo 


 Alex J
Alex J

Alex is the founder of the BFG, he has been in the flooring business for over 12 years and specialize in laying new floors, resurfacing old ones, and giving people practical advice on how to keep their floors looking beautiful.